The Centerforce(R) DYAD(R) DS (Drive System) 8.75 Inch patented multi-disc clutch offers smooth engagement, light pedal, and high-end holding capacity for engine torque levels from 300 to 600 ft /lbs.
The Centerforce(R) DYAD DS 8.75" twin disc clutch has been developed for vehicles requiring a holding capacity of 300 to 600 ft/lbs of torque at the crank. The billet pressure plate features our patented centrifugal weight system (where applicable) for superior clamp load over stock and our patented ball bearing actuated pressure plate (where applicable) providing light pedal effort. The discs pack is equipped with Kevlar full facing material providing increased holding capacity and is available in either sprung or solid hub (possible gear noise) depending on the application. DYAD DS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker RPM's. Vehicles may experience some floater noise during operation. Components are designed, machined and assembled in the USA. DYAD DS clutches are match balanced and ready for installation using the included ARP fasteners.
Application Summary:
| Year |
Make/Model |
| 2005-2006 |
Mitsubishi Lancer |
| Attributes |
| California Proposition 65 |
WARNING: Cancer - www.P65Warnings.ca.gov |
| Clutch Disc Diameter |
8.75, 8.75, 222.3 |
| Counterweight Assist |
No, No |
| Country of Origin (Primary) |
US |
| Crankshaft Bolt Hole Quantity |
7, 7, 7 |
| Disc Material |
Organic/Kevlar, Organic/Kevlar |
| Disc Type |
Full face, Full face |
| Disc Type Sprung Solid |
Solid, Solid |
| Emission Code |
Legal US |
| Flywheel Crank Bolt Qty |
7 |
| Flywheel Crank Bolt Size |
M12 x 1.50 x 15, M12 x 1.50 x 15 |
| Harmonized Tariff Code (Schedule B) |
8708935000 |
| Hazardous Material Code |
N |
| Input Shaft Diameter |
1, 1 |
| Input Spline Quantity |
23, 23 |
| Life Cycle Status Code |
Available to Order |
| Made In The USA |
Assembled, Assembled |
| Material |
Organic, Organic |
| Mounting Hardware Included |
Yes, Yes |
| NAFTA Preference Criterion Code |
B |
| Out of Package Weight |
21.20 |
| Replaceable Friction Surface |
Y |
| Ring Gear O.D. |
11.513, 11.513 |
| Ring Gear Tooth Count |
114 |
| SDR Required Flag |
N |
| Tooth Quantity |
114, 114 |
| Torque Capacity |
300-600, 300-600 |
| Warranty Time |
12 |
| GTIN |
00788442031232 |
