Go EFI 3x2 Tri Power 600 HP Classic Gold EFI System With Go Fuel 340 LPH In-Tank & Go Fuel Tight Fit Regulator Master Kit
Upgrading to electronic fuel injection is one of the best ways to improve the performance of your classic vehicle and FiTech is making the swap even easier with their new In-Tank Fuel Pump Module. The universal assembly allows you to easily mount the required high pressure fuel pump in the best location, the tank! The assembly secures the supplied high pressure pump in tanks with depths ranging from 6” – 15”. The fuel is pumped to a top billet mount assembly to -6 AN male fittings for the supply and return ports. The billet mount was designed with a low profile and places the ports in a parallel position to help when routing the fuel lines. The vent port is on the other side to ease routing the line near the fill tube. To ensure uninterrupted delivery of clean fuel, two sizes of sock/filters are provided, a standard 11 square-inch design and a large, 35 square-inch version. The Universal In-Tank Pump Module is supplied with everything you need for installation including a high output 340 LPH pump capable of supporting up to 800 horsepower engines (normally aspirated). Push-lock style AN fittings are also included along with gaskets and wiring terminals. When it comes to upgrading to electronic fuel injection, setting up a proper high pressure fuel system is paramount to the overall performance of the vehicle.
Upgrading to electronic fuel injection is one of the best ways to improve the performance of your classic vehicle and FiTech is making the swap even easier with their new In-Tank Fuel Pump Module. The universal assembly allows you to easily mount the required high pressure fuel pump in the best location, the tank! The assembly secures the supplied high pressure pump in tanks with depths ranging from 6” – 15”. The fuel is pumped to a top billet mount assembly to -6 AN male fittings for the supply and return ports. The billet mount was designed with a low profile and places the ports in a parallel position to help when routing the fuel lines. The vent port is on the other side to ease routing the line near the fill tube. To ensure uninterrupted delivery of clean fuel, two sizes of sock/filters are provided, a standard 11 square-inch design and a large, 35 square-inch version. The Universal In-Tank Pump Module is supplied with everything you need for installation including a high output 340 LPH pump capable of supporting up to 800 horsepower engines (normally aspirated). Push-lock style AN fittings are also included along with gaskets and wiring terminals. When it comes to upgrading to electronic fuel injection, setting up a proper high pressure fuel system is paramount to the overall performance of the vehicle.
- Classic carburetor gold finish.
- Low profile for improved clearance and improved fuel line positioning
- Supplied with 340 LPH pump, seals, fittings and filter/socksMaster kit
- Optional, not included (highly recommended): Linkage Kit for Tri-Power 39610 (FiTech Part Number 39611)
- Pre-programmed with bolt-n-go technology for out of the box performance with minimal input required.
- Self learning technology for wide range superfast dial in correction.
- Equipped with three 500 CFM throttle bodies.
- Easy tach input, reads tach signal from COIL, HEI, CDI and many other ignition brands.
- Suitable for crate engines and performance builds for up to 600hp.
- Bosch Wideband Oxygen Sensor with mounting kit provides real time fuel map learning!
- For non-boosted engines natural aspirated applications only.
- Wet flow technology with a unique swirl spray annular discharge design that assures complete atomization!
- Bolts onto most 32 manifolds with no modifications necessary.
- Adjustable for tanks from 6" to 15" of depth
- Billet aluminum top features -6 fuel bosses
| Attributes | |
| Country of Origin (Primary) | CN |
| Emission Code | Off Road |
| EPA Classification | 3 |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| Maximum Horsepower with Gas | 600 hp |
| SDR Required Flag | N |
| Warranty Time | 3 |
| GTIN | 00810128300339 |