Go EFI 3x2 Tri Power 600 HP Classic Gold EFI System With Go Fuel Returnless In-Tank Module Master Kit
If you’re looking to update your fuel cell or custom tank with an internal electric fuel pump, turn to FiTech for their new Fuel Cell Pump Modules. The Go Fuel In-Tank Fuel Pump Returnless Module With 2 Inch Fill single pump model supports up to 800 HP. The Single Pump model is supplied with an efficient 340 LPH pump complemented with an internal regulator to maintain 58-psi so it can be run returnless. The CNC-machined billet module top is machined to fit most fuel cells with a 12-bolt flange or can be installed in a custom tank. There is a 2” diameter filler assembly along with a sealed cap (filler tube extensions are available separately). The feed and return outlets are machined for -6AN ORB fittings which are supplied to help complete your installation along with secure terminals to connect the fuel pump. The fuel pump can be positioned in tanks from 7” – 16” in depth and is supplied with an effective filter to stop any debris from entering the system. Nylon hose and Viton seals make the modules compatible for use with E85 fuels.
If you’re looking to update your fuel cell or custom tank with an internal electric fuel pump, turn to FiTech for their new Fuel Cell Pump Modules. The Go Fuel In-Tank Fuel Pump Returnless Module With 2 Inch Fill single pump model supports up to 800 HP. The Single Pump model is supplied with an efficient 340 LPH pump complemented with an internal regulator to maintain 58-psi so it can be run returnless. The CNC-machined billet module top is machined to fit most fuel cells with a 12-bolt flange or can be installed in a custom tank. There is a 2” diameter filler assembly along with a sealed cap (filler tube extensions are available separately). The feed and return outlets are machined for -6AN ORB fittings which are supplied to help complete your installation along with secure terminals to connect the fuel pump. The fuel pump can be positioned in tanks from 7” – 16” in depth and is supplied with an effective filter to stop any debris from entering the system. Nylon hose and Viton seals make the modules compatible for use with E85 fuels.
- Classic carburetor gold finish.
- Wet flow technology with a unique swirl spray annular discharge design that assures complete atomization!
- Bolts onto most 32 manifolds with no modifications necessary.
- Pre-programmed with bolt-n-go technology for out of the box performance with minimal input required
- Depth of 7" to 16"
- 4 bar (58PSI) regulator
- Universal fit
- 340 LPH
- Fits most EFI ready tanks
- AN-6 pressure port
- Low-profile design
- 2" fuel fill
- Optional, not included (highly recommended): Linkage Kit for Tri-Power 39610 (FiTech Part Number 39611)
- Self learning technology for wide range superfast dial in correction.
- Equipped with three 500 CFM throttle bodies.
- Easy tach input, reads tach signal from COIL, HEI, CDI and many other ignition brands.
- Suitable for crate engines and performance builds for up to 600hp.
- Bosch Wideband Oxygen Sensor with mounting kit provides real time fuel map learning!
- For non-boosted engines natural aspirated applications only.
| Attributes | |
| California Proposition 65 | Yes |
| Country of Origin (Primary) | CN |
| Emission Code | Off Road |
| EPA Classification | 3 |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| Maximum Horsepower with Gas | 600 hp |
| NAFTA Preference Criterion Code | B |
| SDR Required Flag | N |
| Warranty Time | 12 |
| GTIN | 00812061036658 |