ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
The ICON CDE Valve upgrade is included for those desiring an easy way to tune the ride electronically from inside the vehicle. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly. When paired with ICON 2.5 or 3.0 Series CDEV rear shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Sequoia TRD Pro.
- Increased wheel travel and improved ride quality over stock
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Vehicle specific tuned for superior shock damping and control
- Specifically designed shock lengths for compatibility with Sequoia TRD Pro's stock front upper control arms
- Adjustable ride height offers 1-2.5" of front lift over stock on Sequoia TRD Pro
- Remote reservoirs maintain cooler operating temperatures during extended off-road use
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- ICON engineered coil springs
Information:
APPLICATION NOTE #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
Application Summary:
| Year |
Make/Model |
| 2023-2025 |
Toyota Sequoia |
| Attributes |
| AAP_UDA_12 |
EA |
| AAP_UDA_22 |
1 |
| AAP_UDA_4 |
55 |
| Add-On Part |
55164 - 22-24 TUNDRA/23-24 SEQUOIA ALUMINUM SKID PLATE SPACER KIT, 198000 - 2 PIN COILOVER SPANNER WRENCH KIT |
| Adjustable Damping |
NO, Yes |
| Adjustable Height |
Yes |
| Adjustable Rebound |
No, No |
| Assembled |
Yes |
| Body Diameter |
2.5, 2.5 |
| Boot Included |
No |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Coil Over Springs Included |
Yes, Yes |
| Compressed Length |
16.73 |
| Country of Origin (Primary) |
US |
| Cylinder Color |
Silver, Silver |
| Cylinder Finish |
Cadmium Plated, Cadmium Plated |
| Cylinder Material |
Steel, Steel |
| Damping Adjustment Type |
Electronic, Electronic |
| Damping Type |
Oil, Oil |
| Dust Shield |
No |
| Dust Shield Included |
No, No |
| Extended Length |
21.68 |
| Gas Charged |
Yes, Yes |
| Grade Type |
Performance, Performance |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Internal Construction Type |
Single Tube, Single Tube |
| Life Cycle Status Code |
Available to Order |
| Lower Mount Type |
Eyelet, Eyelet |
| Material |
Aluminum, Steel |
| Maximum Lift |
2.5, 2.5 |
| Minimum Lift |
1, 1 |
| NAFTA Preference Criterion Code |
C |
| OEM Wheels & Tires Fitment |
Yes, Yes |
| Recommended Aftermarket Tires |
35" x 12.50" (Minor fender trimming and modifications may be required), 35" x 12.50" (Minor fender trimming and modifications may be required) |
| Recommended Aftermarket Wheels |
17x8.5" w/ 5.75” Backspace / 25mm Offset, 17x8.5" w/ 5.75” Backspace / 25mm Offset |
| Reservoir Style |
Remote, Remote |
| SDR Required Flag |
N |
| Self-Leveling |
No |
| Service Parts |
252010 - 2.5 IFP REBUILD KIT, 252010 - 2.5 IFP REBUILD KIT |
| Shaft Diameter |
0.875, 0.875 |
| Shock Absorber Body End Measuring Point |
Top of Upper Mount Plate, Top of Upper Mount Plate |
| Shock Absorber Rod End Measuring Point |
Center of Eylet, Center of Eylet |
| Spring Color |
Black, Black |
| Spring Material |
Steel, Steel |
| Spring Rate Type |
Linear, Linear |
| Travel Length |
4.96 |
| Upper Mount Type |
Mounting Plate, Mounting Plate |
| Valving Type |
Digressive |
| GTIN |
00840103432168 |
