DIFFERENTIAL RING AND PINION FOR DANA 30 AND AMC 20 - RING AND PINIONS INCLUDING TIMKEN BEARING KITS; 4.88 RATIO; REQUIRES 3.73 AND HIGHER FRONT CARRIER; REQUIRES 3.08 AND HIGHER REAR CARRIER
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
- JEEP CJ DANA 30 STANDARD/AMC 20 4.88
Information:
JEEP CJ DANA 30 STANDARD/AMC 20 4.88
Application Summary:
| Year |
Make/Model |
| 1976-1983 |
Jeep CJ5 |
| 1976-1986 |
Jeep CJ7 |
| Attributes |
| App/Model |
AMC 20, Dana 30 Standard |
| California Proposition 65 |
WARNING: Cancer - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Cover Bolt Quantity |
10 Front (D30-488), 12 Rear (AM20-488), 10 Front (D30-488), 12 Rear (AM20-488) |
| Differential Carrier Break |
3.08 Ratio and Higher Rear (AM20-488), 3.73 Ratio and Higher Front (D30-488), 3.08 Ratio and Higher Rear (AM20-488), 3.73 Ratio and Higher Front (D30-488) |
| Differential Case Design Type |
AMC 20, Dana 30, AMC 20, Dana 30 Standard |
| Emission Code |
Legal US |
| Front Differential Carrier Break |
3.73 and Higher |
| Gear Ratio |
4.88 |
| Harmonized Tariff Code (Schedule B) |
8708990011 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| NAFTA Preference Criterion Code |
B |
| Pinion Gear Tooth Quantity |
8, 8 |
| Pinion Shaft Diameter |
1.376 Front (D30-488), 1.625 Rear (AM20-488), 1.376 Front (D30-488), 1.625 Rear (AM20-488) |
| Pinion Spline Count |
26 Front (D30-488), 28 Rear (AM20-488), 26 Front (D30-488), 28 Rear (AM20-488) |
| Position |
Front and Rear |
| Ratio |
4.88 |
| Rear Differential Carrier Break |
3.08 and Higher |
| Ring and Pinion Gear Ratio |
4.88 |
| Ring Gear Bolt Quantity |
10 Front (D30-488), 8 Rear (AM20-488), 10 Front (D30-488), 8 Rear (AM20-488) |
| Ring Gear Diameter |
7.125 Front (D30-488), 8.875 Rear (AM20-488) |
| Ring Gear Material |
8620 Steel, 8620 Steel |
| Ring Gear Outside Diameter |
7.125 Front (D30-488), 8.875 Rear (AM20-488) |
| Ring Gear Rotation |
Standard, Standard |
| Ring Gear Tooth Quantity |
39, 39 |
| SDR Required Flag |
N |
| Taxonomy A |
LD Differential, LD Differential |
| Taxonomy B |
Ring and Pinion Gear Packages, Ring and Pinion Gear Packages |
| Taxonomy C |
Front and Rear, Front and Rear |
| Taxonomy D |
4.88, 4.88 |
| GTIN |
00698231498187 |
