6'' Lift Kit 2019-2023 Ram 2500 W/ Falcon Shocks And Ring And Crossmember Standard Output Diesel Motor
ReadyLIFT is excited to announce PN: 49-19610, an all-new 4-corner coil spring 6" lift kit with Falcon 1.1 Monotube shocks for the 2019-2023 Ram 2500 HD trucks equipped with the Standard Output Cummins turbodiesel engine providing plenty of clearance for an aggressive 37x12.5 tire and up to -18 offset wheel with no rubbing; delivering a beefy, tough look. The 49-19610 is specifically designed for Ram Heavy Duty applications with proprietary front and rear coil springs, heavy-duty radius arm drop brackets, heavy-duty fabricated steel front and rear track bar brackets, forged dropped pitman arm, front/rear sway bar relocation brackets and bump stop extensions preventing over-compression of the new Falcon 1.1 Monotube front & rear shocks that are included in this premium kit. This kit includes a unique CNC-machined 6061-T6 billet Aluminum Driveline Indexing System (DIS) that re-clocks the transfer case aligning the front output shaft for improved driveline angles. Some Ram HD trucks can experience a slight vibration after lifting due to driveline angle sensitivity. ReadyLIFT 6" lift kit with the Drive Line Indexing System (DIS) addresses this condition by re-clocking [indexing] the transfer case and providing a stout heavy-duty steel cross member that accommodates the new T-case position, all resulting in a smooth driving experience on or off-road.
  • Designed for Ram Heavy Duty applications
  • Forged dropped pitman arm
  • Front/rear sway bar relocation brackets
  • Bump stop extensions
  • Prevents overcompression of new Falcon 1.1 Monotube front & rear shocks
  • Premium kit includes Falcon 1.1 Monotube front & rear shocks
  • Only available for 2500 HD Standard Output Motor and 68RFE Transmission
  • Note: Single Cab configuration not validated for fitment & drivability by ReadyLIFT
  • Heavy Heavyduty radius arm drop brackets
  • Heavy Heavyduty fabricated steel front and rear track bar brackets
  • Prevents over Prevents overcompression of new Falcon 1.1 Monotube front & rear shocks
  • Proprietary front and rear coil springs
  • Heavyduty radius arm drop brackets
  • Heavyduty fabricated steel front and rear track bar brackets

Application Summary:

Year Make/Model
2019-2024 Ram 2500
Attributes
17 Inch Wheel Max Backspacing 4.8, 4.8
18 Inch Wheel Max Backspacing 4.8, 4.8
20 Inch or Larger Wheel Max Backspacing 4.8, 4.8
Average Installation Time 120, 120, 1.5
Bushings Included No
California Proposition 65 WARNING: Reproductive Harm - www.P65Warnings.ca.gov
Country of Origin (Primary) US
Fitment Direct Fitment, Direct Fitment
Front Lift Component Coil Spring, Coil Spring
Front Lift Height 6 Inches, 6 Inches, 6
Front or Rear Front and Rear, Front and Rear
Front Shocks Falcon 1.1 Monotube, Falcon 1.1 Monotube
Harmonized Tariff Code (Schedule B) 8708801600
Hazardous Material Code N
Install Difficulty Difficult Requires Professional Installation, Difficult Requires Professional Installation
Installation Time 5+ Hours, 5+ Hours
Life Cycle Status Code Available to Order
Lift Kit Category Big Lift, Big Lift
Lift/Drop Height 6 in.
Max Tire Diameter Custom Fit 37, 37
Max Tire Diameter Sure Fit 35, 35
Max Tire Size 37 Inch, 37 Inch
Maximum Lift 6
Mounting Hardware Included Yes
NAFTA Preference Criterion Code B
Rear Lift Component Coil Spring, Coil Spring
Rear Lift Height 6, 6, 4 Inches
Rear Shocks Falcon 1.1 Monotube, Falcon 1.1 Monotube
SDR Required Flag N
Shock Brand Falcoln, Falcoln
Shocks Included Yes
GTIN 00194933189700

Write a review.

Note: HTML is not translated.
    Bad           Good